ASUNERGE FLEXIBLE 100W 12V MONOCRYSTALLINE SILICON WATERPROOF SOLAR PANEL

• is_customized: Yes
• Power: 100w 200w 300w
• Number of Cells: 32 PCS
• Size: 1050*530mm
• Material: Monocrystalline Silicon
• Model Number: RGN32-100
• Nominal Capacity: 100 Watt
• Foldable Solar Panel: No
• Flexible Solar Panel: Yes
• Number of Panels: 1
• Type: Solar Panel
• Brand Name: ASUNERGE
• Maximum peak power: 100 watt
• Voltage at max. peak power: 16.0V
• Current at max. peak power: 6.28A
• Open circuit voltage: 19.2V
• Short circuit current: 6.68A

Feature

Easy to use: This product is a semi-flexible solar panelthat can be bent up to 30 degrees. It is suitable for mounted on an irregular smooth surfaces such as RV roofs, boats, tents, Yacht, vaulted roofs, etc.

High efficiency, Light weight: Only 2.5mm thick, weight 2.02kg, easy to hang, disassemble and carry.

Easy to install: Metal holes in the four corners of the product for fixing screws and mounting. Each solar panel has been tested several times.

The junction box in front of the solar panel has a Schottky diode built in to prevent reverse current.

The solar panel operates at 18V. Please purchase a solar controller to charge the battery.

Packing List

100W solar panel packing listing:
1* 100W flexible solar panel

Specification

Maximum Power(Pmax): 100W
Maximum Power Voltage(Vmp):16.00V
Maximum Power Current (Imp): 6.25A
Open-Circuit Voltage (Voc): 19.2V
Short-Circuit Current (Isc): 6.87A
Maximum System Voltage: DC1000V
Weight: 1.91KG
Dimensions: 1050*530*2.5mm

Product Detail

solar panel kit/system Connection Diagram

Connecting your panels in series increases the voltage level and controllers accept higher voltage input.Wiring panels in parallel increase current,does not increase voltage.

1.First wiring, connect the controller to the battery.

First connect cable with alligator clips to controller by screwdriver. Then connect alligator clips(black ) to the negative pole of the battery, next connect alligator clips (red) to the positive pole of the battery, pay attention to the positive and negative poles. After correct connection, the controller will display the voltage parameters of battery.

2.Second wiring, connect the flexible solar panels to the controller.

First connect extend cable to the controller by screwdriver.Then connect connect parallel adapter to the solar panel.If there is only one panel, please ignore this step.Next connect parallel adapter to extend cable.taking care when connecting & disconnecting the connector to avoid damage.After right connection,the controller will display the solar panel is charging the battery.

3. The third step is to connect the DC load to the controller

4. Forth step, connect the invertor to the battery for AC output