$276.86 – $411.10
SPECIFICATIONS:
FEATURES:
Maximum Peak Power (Pmax) 100W
Voltage at max. power point (Vmp) 18.0V
Current at max. power point (Imp) 5.55A
Open circuit voltage (Voc) 21.6V
Short circuit current (Isc) 6.11A
Module efficiency 21.70%
Maximum system voltage 700VDC(IEC)
Solar cell type Monocrystalline(157*157mm)
Number of cells 36(3×12)
Dimensions 995x500x2.5mm
Weight 1.72KG
Operating module temperature 47℃+-2℃
Nominal operating cell temperature(NOCT) -20℃~+65℃
Temperature coefficient of Pmax -0.42%/℃
Temperature coefficient of Voc -0.31%℃
Temperature coefficient of Isc 0.05%℃
【Potential Uses】The DGSUNLIGHT 100 Watt Flexible Monocrystalline Panel can be primarily used on off-grid applications that include rooftop, RV, boats and any curvy surfaces
.【Extremely flexible】This panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream
.【Ultra lightweight】Thanks to advanced polymer materials, this product weighs 70% less than conventional glass solar panels, making transportation and installation a breeze
.【Super thin lamination】Hardly noticeable, the DGSUNLIGHT 100W lightweight panel laid flat is Only a tenth of an inch tall making it ideal for a stealthy Solar setup.
NOTE:
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
Packing list:
200w solar panel kit packing list:
1. 2 pcs 100w solar panel
2. 20A 12v/24v solar charge controller
3. 1 set Extension cable with PV connector
4. 1 set cable with alligator clip （connect to battery）
5. 1 set 2 in 1 PV connector （in parallel solar panel)
300w solar panel kit packing list:
1. 3 pcs 100w solar panel
2. 30A 12v/24v solar charge controller
3. 1 set Extension cable with PV connector
4. 1 set cable with alligator clip （connect to battery）
5. 1 set 3 in 1 PV connector （in parallel solar panel)
Solar Panel System Connection:
1. Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2. Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Please strictly follow the instructions for installation and use. We are not responsible for product damage caused by the buyer’s use that is not in accordance with the instructions for use.
